Most NYC families never see a furnace, a meter or a roof, yet we all pay for the energy that runs through them. Energy literacy starts with the bill: once you can read it, the programs and habits that lower it make much more sense. This guide focuses on what a renter or small-building owner can actually do, with programs checked against Con Edison, City and federal pages as of November 17, 2026.
Reading your Con Edison bill
If Con Edison is your utility, its sample residential bill explains each section. The parts worth a family’s attention:
- Account information shows your account number and your next meter reading date. Con Edison points out that knowing this date can help you avoid an estimated bill.
- Billing summary gives the days in the billing period, payments, any new or late charges and the balance due.
- Average daily usage graphs show how much energy you used per day, with a temperature overlay. This is the most useful part for spotting the effect of a new air conditioner or a habit change.
- Service charge details split the bill into two buckets:
- Supply charges cover the energy itself, plus related taxes and surcharges. If you buy supply from an energy services company (ESCO), its information appears here.
- Delivery charges cover getting energy to you, including reading and maintaining meters, plus related taxes and surcharges.
Electricity use is measured in kilowatt-hours (kWh): one kilowatt-hour is the energy a 1,000-watt device uses running for one hour. Comparing the kWh on this month’s bill with the same month last year tells you more than the dollar total, because rates change.
If your gas comes from a different utility, or your building pays for heat, parts of this won’t apply. Look for the same supply and delivery split on any utility bill.
Help paying the bill
Con Edison’s financial assistance page lists several programs. Amounts and rules change, so the official pages are the place to check figures.
- Energy Affordability Program (EAP). A monthly bill discount. According to Con Edison’s EAP page, enrollment is automatic when an agency notifies Con Edison that you receive certain benefits, such as HEAP. If you receive others, such as SNAP, SSI or Medicaid, you need to enroll yourself.
- Enhanced EAP (income-based pathway). For Con Edison residential customers in NYC and Westchester who aren’t already in EAP and whose household income is below the area median. You apply with recent proof of income, enrollment lasts 18 months, and you must reapply.
- Home Energy Assistance Program (HEAP). A state benefit for income-eligible New Yorkers, applied for through the state. Con Edison says a HEAP grant also enrolls you in EAP for 18 months.
- EnergyShare. One-time help toward a bill for customers who have an active disconnect notice and meet the other conditions listed on Con Edison’s page.
Con Edison also says it does not disconnect residential service when the forecast calls for extreme cold or heat.
Programs that improve the home itself
Bill discounts help this month; efficiency upgrades help every month after.
- EmPower+ (NYSERDA). Con Edison’s page for income-eligible renters and homeowners points customers to EmPower+, a New York State program offering no-cost energy efficiency help to households that qualify. Eligibility rules, including income limits, which building types are covered and what renters can get, are set by NYSERDA and can change, so check NYSERDA’s EmPower+ page before applying.
- NY Energy Advisor. The same Con Edison page lists this state questionnaire, which produces a custom list of energy-saving offers you may qualify for. It’s a good starting point if you’re unsure where to begin.
- Statewide Solar for All (REACH). Con Edison’s assistance page describes state bill credits for customers who are enrolled in EAP and live in a disadvantaged community. Enrollment is automatic for those who qualify, with no equipment needed.
Apartment-friendly savings
You don’t need to own the building to cut waste. These steps come from the U.S. Department of Energy’s Energy Saver tips for renters and NYC Emergency Management.
Heating season
- If you control your own thermostat, DOE says turning it back 7–10°F for about eight hours a day, such as overnight or while everyone is out, can save up to 10% on heating. A programmable thermostat makes this automatic.
- Ceiling fans set to the correct direction can help move warm air in winter; DOE cites potential savings on both winter and summer bills.
- Drafts: weatherstripping around windows and doors reduces air leaks. Ask your landlord before installing anything permanent.
- Water heating: if you control a water heater, DOE suggests lowering it from 140°F to 120°F, which also reduces scald risk.
Cooling season
- Set it to 78°F. NYC Emergency Management’s extreme heat guidance recommends 78°F or “low cool,” and suggests a timer that starts cooling no more than 30 minutes before you get home.
- Block the sun with shades during the day and skip the oven on the hottest afternoons.
Saving energy should never come at the cost of safety in a heat wave. Our extreme heat family guide explains when to run the air conditioner regardless of cost and where to find help paying for one.
All year
- Lighting: DOE estimates the average household can save more than $200 a year by switching to LED lighting.
- Hot water is energy too. Shorter showers and full loads of laundry and dishes save both water and the energy that heats it; see our guide to NYC tap water and saving water.
- Unplug the “always on” extras you don’t need, like a spare TV box or old phone chargers, or plug them into a power strip you switch off.
Make it a family project
Energy is invisible, which makes it a good puzzle for kids:
- Read the meter date together. Find the next reading date on the bill and mark it on the calendar.
- Run an “energy detective” walk. Have kids list everything plugged in, room by room, and circle what’s on when nobody is using it.
- Compare the usage graph month to month and talk about why it rises in July or January.
- Pick one family goal, such as lights off when leaving a room, and check the next bill’s graph for a change.
For a look at how New Yorkers have mapped the city’s energy landscape before, see our history piece on NYC’s Powerful Green Map.
Before you go
- Find your next meter reading date and your average daily usage on your bill.
- Check whether your household qualifies for EAP or the income-based pathway, and enroll.
- If your income is limited, try NY Energy Advisor and check NYSERDA’s EmPower+ page to see whether you qualify.
- Set the AC to 78°F and use a timer; set the heat back at night if you control it.
- Swap remaining bulbs for LEDs and switch off idle electronics.